HR3LID - Hose Ramp with Lid

HR3LID - Hose Ramp with Lid

The HR3LID hose ramp  is a 2 channel hose ramp designed for vehicle and pedestrian use. Multiple units can be joined together to make a continuous, longer run, as with the HR1 and HR2. The lids are manufactured from a high visibility, yellow polyethylene.

Availability

HR3LID
Weight (Kg): 26
Overall Dimensions* (mm): 900(l) x 615(w) x 100(h)
Maximum Load: 12 tonnes (per axel)
Number of Channels: 2
Channel Dimensions (mm): 84 (wide at base) < 92 (wide at top) x 75 (deep)

*Length (l) = the direction in which the channels run. Width (w) = the direction from one ramped side to the other.

Please note: These ramps are for temporary deployment and are not designed for permanent fitting. Signage should be in place to slow traffic down (max. 5 mph) while traversing the ramp. Not suitable for forklifts.