Heated IBC Insulation Jackets

PAR Group offer the following types of heated IBC insulation jackets suitable for IBC containers. These jackets are designed to provide electric surface heating to products stored in 1000 litre intermediate bulk containers (IBC). Our heated IBC insulation jackets reduce the viscosity of fats, oils, foodstuffs and chemicals. Heated IBC insulation jackets are available to buy online at PAR Direct by clicking the link above.

HIBC-B Heated IBC Insulation Jacket

HIBC/B heated IBC insulation jackets are manufactured from a water resistant, Teflon™ coated polyester material and insulated with a spiral wound silicone resistance element. They have quick release adjustable buckles for ease of installation and cover all four sides of the IBC. The HIBC/B has two separate insulating circuits for its upper and lower halves, each controlled with separate integral thermostats. This allows for the upper circuit to be switched off once the content level has dropped below halfway. Insulated lids are available as extra if required.

Applications

Heating of liquid materials stored in bulk containers throughout a wide range of industries. Ideal for frost protection, temperature maintenance and heat up applications.

Key Features

• Teflon™ coated polyester with dual power circuits for upper and lower heated zones.
• Thermally insulated.
• Includes a 4 metre power cable without plug.

Availability

Product Code	Size (mm)	Rating (volts)	Thermostat Controls*
HIBC-B-110V	4400 x 1000	110	0°C to +90°C (as standard)
HIBC-B-230V	4400 x 1000	230	0°C to +90°C (as standard)

*May also be supplied with a 0°C to +40°C thermostat. Please note at the point of enquiry if the thermostat temperature range is critical.

IBC1, IBC2 and IBC3 Heated IBC Insulation Jackets

Our IBC1, IBC2 and IBC3 heated IBC insulation jackets are manufactured from a water resistant nylon outer material and a coated glass cloth inner for chemical and temperature resistance. They have quick release adjustable buckles for ease of installation, which cover all four sides of the IBC.

The IBC1 jacket has a single heating circuit and is ideal for frost protection. Insulating lids are not supplied as standard with IBC1 jackets, but are available to purchase separately.

The IBC2 jacket has dual top and bottom circuits, enabling the container to be heated rapidly. It also allows for the top and bottom zones to be controlled separately with integrated thermostats. Insulating lids are not supplied as standard with IBC2 jackets, but are available to purchase separately.

The IBC3 jacket has three individual heating circuits, allowing for much shorter heat-up times and enhanced temperature maintenance. The IBC3 jacket is supplied with an insulated lid as standard.

Applications

Heating of liquid materials stored in bulk containers throughout a wide range of industries.

IBC1:	Frost protection and gentle viscosity improvement.
IBC2:	Frost protection, temperature maintenance and heat-up.
IBC3:	Temperature maintenance and heat-up (specifically high temperature applications and shorter heat-up times).

Key Features

• Standard sizes are designed to fit standard industry containers.
• Water resistant nylon materials.
• Coated glass cloth inside layer for protection against chemicals.
• Each heating circuit includes its own power cable without plug.
• IP54 rated.

Availability

Product Code	Size (mm)	Rating (volts)	Heating Circuits	Thermostat Controls	Insulating Lid
IBC1-110V	4060-4310 (adjustable) x 950	110	1 x 1400W (1400W)	-5°C to +40°C	Separate
IBC1-240V	4060-4310 (adjustable) x 950	240	1 x 1400W (1400W)	-5°C to +40°C	Separate
IBC2-110V	4060-4310 (adjustable) x 950	110	2 x 1400W (2800W)	0°C to +90°C	Separate
IBC2-240V	4060-4310 (adjustable) x 950	240	2 x 1400W (2800W)	0°C to +90°C	Separate
IBC3-240V	4060-4310 (adjustable) x 950	240	3 x 1330W (3990W)	0°C to +90°C	Included

Also available: Hazardous area (EX) heating jackets with ATEX and IECEx Zone 1, 2, 21 & 22 approvals. These are designed to help maintain safe operating conditions in potentially explosive areas. Please enquire for more information.

Please note: IBC3-240V is supplied with an insulating lid as standard. Insulating lids are also available as an extra. Custom sizes are also available upon request.

IBC Insulating Lid

IBC Insulating Lids are designed to reduce heat loss from the top of an exposed IBC unit. The lids feature a centre top opening flap allowing access to the centre fill cap, eliminating the need to fully remove the lid. Heat loss reduction results in energy saving and therefore lower bills.

Availability

Product Code	Description
IBC-LID	IBC insulating lid t/s IBC1, IBC2 and IBC3 (IBC3's are supplied with a lid as standard).

Teflon™ is a registered trademark of The Chemours Company.

IBC Waterproof Cover

IBC waterproof covers are manufactured from heavy-duty PVC. They provide waterproof protection for standard IBC flexible heating jackets and are used where a tank is positioned outdoors, open to direct rain, or in a potentially wet environment. We also offer bespoke designed covers for non-standard or less common IBCs.

Availability

Product Code	Description
IBC-WATERCOVER	IBC waterproof cover suitable for standard IBC heating jackets.

 Note: PVC colour may vary, if this is vital to your application please note this upon enquiry.